Clear Search

Books+ Search Results

Subject: "Materials"
Author/Creator: Is
Is Is Not
Langley Research Center
Subject: Is
Is Is Not
Testing

Advanced Search

Basic Search
Help
Add a row
Reset

Limit results by

Show Online Results Only
Online Results (1)
1.
An evaluation of mixed-mode delamination failure criteria
Author
Reeder, J. R.
Published
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1992]
Location
SML, Microform (Non-Circulating) >> NAS 1.15:104210
Format
Books / Microforms
2.
Measurement of mechanical and thermophysical properties of dimensionally stable materials for space applications
Author
Rawal, S. P.
Published
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center ; [Springfield, Va. : National Technical Information Service, distributor, 1992]
Location
SML, Microform (Non-Circulating) >> NAS 1.26:189552
Format
Books / Microforms
3.
Environmental exposure effects on composite materials for commercial aircraft
Author
Hoffman, Daniel J.
Published
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1991]
Location
SML, Microform (Non-Circulating) >> NAS 1.26:187478
Format
Books / Microforms
4.
Compression failure mechanisms in unidirectional composites
Author
Hahn, H. Thomas
Published
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1984]
Location
SML, Microform (Non-Circulating) >> NAS 1.15:85834
Format
Books / Microforms
5.
Delamination growth analysis in quasi-isotropic laminates under loads simulating low-velocity impact
Author
Shivakumar, K. N.
Published
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1984]
Location
SML, Microform (Non-Circulating) >> NAS 1.15:85819
Format
Books / Microforms
6.
Standard test evaluation of graphite fiber/resin matrix composite materials for improved toughness
Author
Chapman, Andrew J.
Published
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center ; [Springfield, Va. : For sale by the National Technical Information Service, 1984]
Location
SML, Microform (Non-Circulating) >> NAS 1.15:86298
Format
Books / Microforms
7.
The effect of configuration on strength, durability, and handle of Kevlar fabric-based materials
Author
Rueter, L. L.
Published
Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Service, 1977.
Location
Library Shelving Facility (LSF) >> NASA CR-2738
Format
Books
8.
Arc-tunnel evaluation of some ablative heat shield materials for the X-15-2
Author
Chapman, Andrew J.
Published
Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1967.
Location
Library Shelving Facility (LSF) >> NASA TN D-3753
Format
Books
9.
Shear-lag analysis of notched laminates with interlaminar debonding
Author
Goree, J. G.
Published
Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Office ; [Springfield, Va. : For sale by the National Technical Information Service], 1984.
Location
Library Shelving Facility (LSF) >> NASA CR-3798
Format
Books
10.
Moisture diffusion parameter characteristics for epoxy composites and neat resins
Author
Long, Edward R.
Published
Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1979.
Location
SML, Microform (Non-Circulating) >> NAS 1.60:1474
Format
Books / Microforms
11.
Stress-concentration factors for finite orthotropic laminates with a circular hole and uniaxial loading
Author
Hong, C. S.
Published
Washington, D.C. : National Aeronautics and Space Administration, Scientifice and Technical Information Office [Springfield, Va. : For sale by the National Technical Information Service], 1979.
Location
SML, Microform (Non-Circulating) >> NAS 1.60:1469
Format
Books / Microforms
12.
Effects of specimen preparation on the accuracy of electromagnetic property measurements of solid materials with an automatic network analyzer
Author
Long, Edward R.
Published
Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; Springfield, Va. : For sale by the National Technical Information Service, 1986.
Location
Library Shelving Facility (LSF) >> NAS 1.15:87628
Format
Books
13.
Comparison of polyester, film-yarn composite, balloon materials subjected to shear and biaxial loading
Author
Niccum, R. J.
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972.
Location
Library Shelving Facility (LSF) >> NASA CR-2047
Format
Books
14.
Design and fabrication of composite wing panels containing a production splice
Author
Reed, D. L.
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1975]
Location
Library Shelving Facility (LSF) >> NASA CR-2549
Format
Books
15.
A higher-order theory for geometrically nonlinear analysis of composite laminates
Author
Reddy, J. N. (Junuthula Narasimha), 1945-
Published
Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch, 1987.
Location
Library Shelving Facility (LSF) >> NASA CR-4056
Format
Books
16.
Radiation testing of composite materials, in situ versus ex situ effects
Author
Kurland, Richard M.
Published
Washington, D.C. : National Aeronautics and Space Administration, Scietific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service, 1981]
Location
Library Shelving Facility (LSF) >> NASA CR-3475
Format
Books
17.
Moisture determination in composite materials using positron lifetime technique
Author
Singh, Jag J.
Published
Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Office ; [Springfield, Va. : For sale by the National Technical Information Service], 1980.
Location
SML, Microform (Non-Circulating) >> NAS 1.60:1681
Format
Books / Microforms
18.
The effect of resin composition and fillers on the performance of a molded charring ablator
Author
Peters, Roger W.
Published
Washington, D.C. : National Aeronautics and Space Administration, [1963]
Location
Library Shelving Facility (LSF) >> NASA TN D-2024
Format
Books
19.
Effects of bottom-structure flexibility of water landing loads of Apollo spacecraft models
Author
Stubbs, Sandy M.
Published
Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1969]
Location
Library Shelving Facility (LSF) >> NASA TN D-5108
Format
Books
20.
Water pressures and accelerations during landing of a dynamic model of the Apollo spacecraft with a deployed-heat-shield impact-attenuation system
Author
Stubbs, Sandy M.
Published
Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1968]
Location
Library Shelving Facility (LSF) >> NASA TN D-4275
Format
Books
21.
Comparison of measurements of internal temperatures in ablation material by various thermocouple configurations
Author
Dow, Marvin B.
Published
Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Office of Technical Services, Dept. of Commerce, Washington, D.C. 20230], 1964.
Location
Library Shelving Facility (LSF) >> NASA TN D-2165
Format
Books
22.
Fracture behavior of unidirectional boron/aluminum composite laminates
Author
Goree, J. G.
Published
Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch; [Springfield, Va. : For sale by the National Technical Information Service], 1983.
Location
Library Shelving Facility (LSF) >> NASA CR-3753
Format
Books
23.
Cyclic debonding of unidirectional composite bonded to aluminum sheet for constant-amplitiude loading
Author
Roderick, George L. (George Lawrence), 1945-
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1976.
Location
Library Shelving Facility (LSF) >> NASA TN D-8126
Format
Books
24.
Minimum weight design of ring and stringer stiffeners for axially compressed cylindrical shells with and without internal pressure
Author
Block, David L.
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972.
Location
Library Shelving Facility (LSF) >> NASA CR-2165
Format
Books
25.
Three-dimensional elastic-plastic finite-element analyses of constraint variations in cracked bodies
Author
Newman, J. C.
Published
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center ; ; [Springfield, Va. : National Technical Information Service, distributor, 1993]
Location
SML, Microform (Non-Circulating) >> NAS 1.15:107704
Format
Books / Microforms
26.
Fuel containment and damage tolerance in large composite primary aircraft structures phase II, testing
Author
Sandifer, J. P.
Published
Hampton, Va. : National Aeronautics and Space Administration, Langley Research Center, [1988]
Location
SML, Microform (Non-Circulating) >> NAS 1.26:172519
Format
Books / Microforms
27.
Space radiation effects on graphite-epoxy composite materials
Author
Milkovich, Scott Milan
Published
Hampton, VA : The Center, [1984]
Location
SML, Microform (Non-Circulating) >> NAS 1.15:85478
Format
Books / Microforms
28.
An experimental investigation of the effectiveness of single aluminum meteoroid bumpers
Author
Humes, Donald H.
Published
Washington, D.C. : National Aeronautics and Space Administration ; [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1963.
Location
Library Shelving Facility (LSF) >> NASA TN D-1784
Format
Books
29.
Aerothermal and structural performance of a cobalt-base superalloy thermal protection system at Mach 6.6
Author
Sawyer, James Wayne
Published
Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977.
Location
Library Shelving Facility (LSF) >> NASA TN D-8415
Format
Books
30.
Effects of simulated space environment on Skylab parasol material
Author
Slemp, Wayne S.
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974.
Location
Library Shelving Facility (LSF) >> NASA TM X-2965
Format
Books
31.
Mechanical properties and column behavior of thin-wall Be-38Al alloy tubing
Author
Rummler, Donald R.
Published
Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1969]
Location
Library Shelving Facility (LSF) >> NASA TN D-5145
Format
Books
32.
Elevated-temperature application of the IITRI compression test fixture for graphite/polyimide filmentary composites
Author
Raju, B. Basava
Published
Washington, D.C. : National Aeronautics and Space Administration, Scientific and Technical Information Branch ; [Springfield, Va. : For sale by the National Technical Information Service], 1979.
Location
SML, Microform (Non-Circulating) >> NAS 1.60:1496
Format
Books / Microforms
33.
Evaluation of a metal shear web selectively reinforced with filamentary composites for space shuttle application
Author
Laasko, J. H.
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1974]
Location
Library Shelving Facility (LSF) >> NASA CR-2409
Format
Books
34.
Nonmetallic materials handbook
Author
Podlaseck, Stanley E.
Published
Washington : National Aeronautics and Space Administration, Scientific and Technical Information Office ; [Springfield, Va. : for sale by the National Technical Information Service], 1979-
Location
Library Shelving Facility (LSF) >> NASA CR-3133
Format
Books
35.
Aerodynamic heating in large cavities in an array of RSI [reusable surface insulation] tiles
Author
Hunt, L. Roane (Lewis Roane)
Published
Washington : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the National Technical Information Service, 1977.
Location
Library Shelving Facility (LSF) >> NASA TN D-8400
Format
Books
36.
Influence of salt and elevated-temperature exposure on the maximum compressive strength of titanium-alloy skin-stringer panels
Author
Gardner, James E. (James Edward), 1942-
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1970]
Location
Library Shelving Facility (LSF) >> NASA TN D-5670
Format
Books
37.
Effect of two-dimensional multiple sine-wave protrusions on the pressure and heat-transfer distributions for a flat plate at Mach 6
Author
Cary, Aubrey M.
Published
Washington, D.C. : National Aeronautics and Space Administration ; Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, [1968]
Location
Library Shelving Facility (LSF) >> NASA TN D-4437
Format
Books
38.
Impact tests on fibrous composite sandwich structures
Author
Rhodes, Marvin D.
Published
[Washington] : National Aeronautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. ; for sale by the National Technical Information Service, 1978.
Location
SML, Microform (Non-Circulating) >> NAS 1.15:78719
Format
Books / Microforms
39.
Flight and ground tests of a very-low-density elastomeric ablative material
Author
Olsen, George C.
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1972.
Location
Library Shelving Facility (LSF) >> NASA TN D-6956
Format
Books
40.
Mechanical properties and column behavior of thin-wall beryllium tubing
Published
Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1968.
Location
Library Shelving Facility (LSF) >> NASA TN D-4833
Format
Books
41.
Effects of service environments on aluminum-brazed titanium (ABTi)
Author
Cotton, W. L.
Published
[Washington] : National Aeronautics and Space Administration, Scientific and Technical Information Office ; Springfield, Va. : For sale by the National Technical Information Service, 1978.
Location
Library Shelving Facility (LSF) >> NASA CR-2943
Format
Books
42.
An Analytic and experimental evaluation of flowing air test conditions for selected metallics in a shuttle TPS application
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service, 1975]
Location
Library Shelving Facility (LSF) >> NASA CR-2531
Format
Books
43.
Influence of various fabrication methods on the compressive strength of titanium skin-stringer panels
Author
Pride, Richard A. (Richard Allen), 1922-
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the Clearinghouse for Federal Scientific and Technical Information, 1969]
Location
Library Shelving Facility (LSF) >> NASA TN D-5389
Format
Books
44.
A study of the effect of selected material properties on the ablation performance of artificial graphite
Author
Maahs, Howard G.
Published
Washington, D.C. : National Aeronautics and Space Administration : [For sale by the Clearinghouse for Federal Scientific and Technical Information, Springfield, Virginia 22151], 1972.
Location
Library Shelving Facility (LSF) >> NASA TN D-6624
Format
Books
45.
The effects of environmental exposure on reusable surface insulation for space shuttle
Author
Ransone, Philip O.
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975.
Location
Library Shelving Facility (LSF) >> NASA TM X-3252
Format
Books
46.
An investigation of high-velocity impact cratering into nonmetallic targets and correlation of penetration data for metallic and nonmetallic targets
Author
Kinard, William H.
Published
Washington : National Aeronautics and Space Administration, [1961]
Location
Library Shelving Facility (LSF) >> NASA TN D-726
Format
Books
47.
The effect of ring distortions on buckling of blunt conical shells
Author
Heard, Walter L.
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1975.
Location
Library Shelving Facility (LSF) >> NASA TN D-7853
Format
Books
48.
An experimental investigation of the damping contribution of an elastomeric ablator on aluminum beams
Author
Howell, William E. (William Edward)
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1974.
Location
Library Shelving Facility (LSF) >> NASA TM X-2852
Format
Books
49.
Effects of material composition on the ablation performance of low-density elastomeric ablators
Author
Tompkins, Stephen S. (Stephen Stern), 1938-
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973.
Location
Library Shelving Facility (LSF) >> NASA TN D-7246
Format
Books
50.
Experimental investigation of orthotropic panel flutter at arbitrary yaw angles, and comparison with theory
Author
Shyprykevich, Peter
Published
Washington, D.C. : National Aeronautics and Space Administration ; [Springfield, Va. : For sale by the National Technical Information Service], 1973.
Location
Library Shelving Facility (LSF) >> NASA CR-2265
Format
Books