Books+ Search Results
Cyclic oxidation of high temperature materials : mechanisms, testing methods, characterisation and life time estimation : proceedings of an EFC Workshop, Frankfurt/Main, 1999
Title
Cyclic oxidation of high temperature materials : mechanisms, testing methods, characterisation and life time estimation : proceedings of an EFC Workshop, Frankfurt/Main, 1999 / edited by M. Schütze & W.J. Quadakkers.
ISBN
1601191952
1907625518
9781601191953
9781907625510
1861251009
9781861251008
Published
London : Published for the European Federation of Corrosion by IOM Communications, 1999.
Physical Description
1 online resource (xv, 478 pages) : illustrations.
Local Notes
Access is available to the Yale community.
Notes
Includes index.
Electronic reproduction. [S.l.] : HathiTrust Digital Library, 2010.
Access and use
Access restricted by licensing agreement.
Variant and related titles
Knovel OCLC KB.
Other formats
Print version: Cyclic oxidation of high temperature materials. London : Published for the European Federation of Corrosion by IOM Communications, 1999
Format
Books / Online
Language
English
Added to Catalog
December 05, 2017
Series
European Federation of Corrosion publications, no. 27
Bibliography
Includes bibliographical references and index.
Contents
""Contents""; ""Series Introduction""; ""Preface ""; ""Foreword""; ""Part 1
Oxidation and Failure Mechanisms Under Cyclic Conditions""; ""Interfacial Crack Growth During Temperature Changes""; ""The Influence of Surface Pre-treatment on the Integrity of Alumina Scales on the ODS Alloy MA 956""; ""The Effect of Water Vapour on the Oxidation of Alloys that Develop Alumina Scales for Protection ""; ""The Influence of Thermal Cycling on Internal Oxidation and Nitridation of Nickel-Base Alloys""; ""Cyclic Oxidation of Thin FeCrAI(RE) Foils in Air: SEM and EPMA Investigations""
""Advantages of Ferritic Stainless Steels in Cyclic High Temperature Conditions""""Investigation of a New Methodology in High Temperature Oxidation""; ""Effect of Implanted Silicon on the Cyclic Oxidation Behaviour of AISI 304 and AISI 430 Stainless Steels""; ""The Importance of Relevant Experimental Parameters for High Temperature Cyclic Oxidation Experiments
An attempt for a checklist""; ""Corrosion of Heat Exchanger Steels in Cycled Gas Atmospheres at 600°C""; ""Behaviour of Protective Coatings against Sulfidation under Cyclic Conditions""
""Cyclic Oxidation of PM 1000""""Part 2
Test Procedures and Parameters Influencing Cyclic Oxidation Behaviour""; ""Effect of Cycle Frequency on High-Temperature Oxidation Behaviour of Alumina- and Chromia-Forming Alloys""; ""The Effect of Thermal Cycling on the Mechanical Failure of Alumina Scales formed on Commercial FeCrAI-RE Alloys""; ""Cyclic Oxidation Testing and Modelling: a NASA Lewis Perspective""; ""Significance of Experimental Procedures on the Hot Corrosion Behaviour of Nickel-Base Alloys under Cyclic Conditions""
""Numerically Calculated Oxidation Induced Stresses in Thermal Barrier Coatings on Cylindrical Substrates """"Electron Beam-Physical Vapour Deposited Thermal Barrier Coating Lifetime Response to Various Bond Coat Pre-treatments""; ""Degradation of Aluminide, Chromium-Aluminide and Thermal Barrier Coatings in Conditions of Cyclic Thermal and Mechanical Loads""; ""Thermal Cycling of NiAI Intermetallic Coatings Prepared by High Velocity Oxy-Fuel (HVOF) Thermal Spraying""
""Part 3
Long Term Behaviour and Near-Service Conditions """"Long-Term, Cyclic Oxidation Behaviour of Three Chromia-Forming Alloys Exposed to Air at 982°C""; ""Oxidation Limited Life of FeCrAI Based Alloys During Thermal Cycling""; ""Characterisation of Oxidation Resistance of Heat-resistant Cast Alloys in the 5 x 24-h Test""; ""Cyclic Oxidation Testing by Resistance Heating""; ""Part 4
The Behaviour of Coatings Under Cycling Conditions""; ""Thermal Cycling Testing of Thermal Barrier Coatings""; ""Investigations of the Microstructure and Stress State in Oxide Scales""
Subjects
Genre/Form
Conference papers and proceedings.
Also listed under
Bookmark As
Citation
