9783319514932

3319514938

9783319514925

331951492X

The minerals, metals & materials series,

Part 1: 2017 Symposium on Functional Nanomaterials: Emerging Nanomaterials and Nanotechnology

High-performance Supercapacitors Based on Hierarchical VOx Microspheres Forming from Hyperbranched Nanoribbons

Potential of Magnetotactic Bacteria for the Fabrication of Iron Nanoparticles

Facile Green Synthesis and Characterization of Water-soluble Superparamagnetic Iron Oxide Nanoparticles-gold Porphyrin Conjugate for Improved Photodynamic Therapy

Synthesis of AgNP?s from Industrial Wastes

Synthesis of Mn2O3 Nanopowders with Urea and Citric Acid by Solution Combustion Route

Part 2: Additive Manufacturing of Metals: Establishing Location-Specific Processing-Microstructure-Property Relationships

Evolution of Aluminum Alloys Structure at Production Phases of 3D Products by Methods of Additive Technologies

Characterization of Multiperforated Plates Manufactured by SLM and EBM for Aeroengine Applications

Direct Laser Metal Deposition of Eutectic Al-Si Alloy for Automotive Applications

Additive Manufacturing to Produce Standard and Custom Alloy Titanium

Aiming for Modeling-assisted Tailored Designs for Additive Manufacturing

Part 3: Additive Manufacturing: Building the Pathway towards Process and Material Qualification

The Use of Laser Ultrasound to Detect Defects in Laser Melted Parts

SLM Process Variables and Part Geometry Optimization Based on Numerical Prediction of Process Induced Distortions

Optimizing, Fabricating and Characterizing Additively Manufactured Process Tubing

Scaling Relationships for Direct Ink Writing with Acoustic Focusing

The Influence of Gas Cooling in Context of Wire Arc Additive Manufacturing: A Novel Strategy of Affecting Grain Structure and Size

Microstructure and Mechanical Properties of Laser Deposited Ni/WC Metal Matrix Composite Coatings

Composite Powder Consolidation Using Selective Laser Melting: Input Energy/Porosity Morphology/Balling Effect Relation

Part 4: Advanced Characterization Techniques for Quantifying and Modeling Deformation Mechanisms

Strain Localization Structures in Textured Magnesium AZ31 under Reversed Loading via Multi-scale Digital Image Correlation

Deformation and Strengthening Mechanisms in AISI 321 Austenitic Stainless Steel under both Dynamic and Quasi-static Loading Conditions

Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths

Microstructural Characterization of Inconel 600 Tubes after Tensile Tests at Various Temperatures and Strain Rates

Part 5: Advanced High-Strength Steels

Influences of Thermomechanical Treatments on the Microstructure Evolution and Mechanical Properties of Nano-precipitates Strengthened Steels

Effects of Solid Solution Treatment on the Microstructure and Mechanical Properties in the Ultra-high Strength Steel Strengthened by Nanoscale Particles

Effects of Microstructure on the Strain Rate Sensitivity of Advanced Steels

Part 6: Advanced Materials in Dental and Orthopedic Applications

Characterization of Chitin Synthesized from Snail Shell

Titanium-magnesium Composite for Dental Implants (BIACOM)

Part 7: Alloys and Compounds for Thermoelectric and Solar Cell Applications V

Thermoelectric Behaviour of Polyvinyl Acetate /CNT Composites

Part 8: Applications of Solidification Fundamentals

Microstructure Characteristics of A356 Nanocomposites Manufactured Via Ultrasonic Cavitation Processing under Controlled Solidification Conditions

Part 9: Biological Materials Science

Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants

Osteoporosis and fatigue fracture prevention by analysis of bone microdamage

Bone Remodeling under Tooth Loading

Investigating Biochemical Constituents of Cymbopogon citratus Leaf: Prospects on Total Corrosion of Concrete Steel-rebar in Acidic-Sulphate Medium

Two-step sintering effects on the microstructure and mechanical properties of forsterite scaffolds

Part 10: Bulk Metallic Glasses XIV

Material Behavior in Micro Milling of Zirconium based Bulk Metallic Glass

Part 11: Computational Thermodynamics and Kinetics

Comparison of the Phase-field Models to Predict the Recrystallization Kinetics

Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments

Atomic Scale Modeling of Fe-Al-Mn-C Alloy using Pair Models and Monte-Carlo Calculations

Control Technique Study of Non-metallic Inclusions in Low Carbon Steel by Rare Earth Final Deoxidization

Effect of Cooling Rate on Phase Transformation and Microstructure Evolution in a Large Size Forged Ingot of Medium Carbon Low Alloy Steel

Formation and Control of CaS Inclusion in Gear Steel 20MnCr5

Investigations on the Mechanical Deformation of Amorphous Alloy Nanowires Using Phase-field Modeling and Thermodynamics Avalanche Models

Thermodynamic Modeling of Al-Fe-Cr Ternary System

Part 12: Defects and Properties of Cast Metals

A Modeling and Experimental Investigation on the Formation of Acicular Silicon and Sludge in High Pressure Die Casting of a Modified A383 Alloy

Hot-tearing of Multicomponent Al-Cu Alloys Based on Casting Load Measurements in a Constrained Permanent Mold

Effect of Molybdenum Content, Pouring Temperature and Cooling Rate on the Casting Defects of High Chromium White Cast Iron

Effect of Various Aluminum Content on the Formation of Inclusion

Effect of Segregated Alloying Elements on the High Strength Steel Properties: Application to the Large Size Ingot Casting Simulation

Thermal-Mechanical Model of Depression Formation in Steel Continuous Casting

Study for the Initiation Locations of Longitudinal Surface Cracks on Beam Blank in the Mold of Continuous Casting

The Influence of SEN and Upper Nozzle Design on the Flow Character for the Slab Quality

Effect of the Addition of Ce and Si on the Hot Cracking Behavior of SiMn Alloy during the Solidification Process

Modeling and Predication of Shrinkage Porosity Formation in Steel Ingot

Numerical Analysis of Coupled Turbulent Flow and Macroscopic Solidification in a Billet Continuous Casting Mold with Electromagnetic Stirring

Part 13: Environmentally Assisted Cracking: Theory and Practice

Hydrogen embrittlement and hydrogen-enhanced strain-induced vacancies in a-iron

Factors causing hydrogen embrittlement of cold-drawn pearlitic steel fractured under elastic/plastic region

Corrosion of Nickel-Titanium, C110, and Al6061 in Gallium-based Liquid Metal Alloys

Part 14: General Poster Session

Synthesis and characterization of Al?B4C powders by mechanical alloying

Direct Conversion of Celestite to SrCO3 by Wet Milling

Part 15: High Temperature Electrochemistry III

Electrochemistry in Molten LiF-BeF2 Salt for Fluoride Salt-Cooled High Temperature Reactor Applications

Impurity Removal from Titanium Oxycarbide

Next-Generation Molten Oxide Energy Materials R & D

Effects of Oxide Precursor Preparation Parameters on the Electrochemical Reduction of Tantalum Pentoxide in Calcium Chloride Melt

The Effect of Temperature on Electrochemical Codeposition of Mg-Ni Hydrogen Storage Alloys from Molten Salt System

Part 16: Materials and Fuels for the Current and Advanced Nuclear Reactors VI

Diffusion Studies in the Development of an FCCI Barrier for High-Burnup Metallic Nuclear Fuel

Part 17: Materials Engineering of Soft Magnets for Power and Energy Applications

Development of Mold Inductor for Power Conversion System

Effect of Annealing Time on the Texture of a 2.8% Si Non-Oriented Electrical Steel after Inclined and Skew Rolling

Multi-parameter Magnetic Material Characterization for High Power Medium Frequency Converters

Part 18: Phase Transformations and Microstructural Evolution

An Experimental Assessment of the a +a? Miscibility Gap in Fe-Cr

Phase Transformation,

Microstructural Evolution and Property Modification in Rapidly Solidified Grey Cast Iron

Morphology of Order-disorder Structures in Rapidly Solidified L12intermetallics

Part 19: Recent Developments in Biological, Structural and Functional Thin Films and Coatings

Development of Enamel Coatings in Accordance with Recent Regulations of Food Contact Materials

Transmission Probability of Diffusing Particles? A Case Study

Preparation of Porous Titanium Oxide Film by Sol-Gel Method

Part 20: Solid State Precipitation

Hydride Precipitates in Zirconium Alloys: Evolution of Dissolution and Precipitation Temperatures during Thermal Cycling Correlated to Microstructure Features

Analysis of Beta ́ Cu4Ti Precipitation in Cu-Ti Alloys by Conventional and Diffusion-couple Methods

Carbide Precipitation in a Low-alloy Ferritic Steel

Part 21: Student-Run Symposium: Building Bridges? Connecting Academic and Industry Research

Fundamental Principles for a Successful Collaboration between University and Metalworking Industries.

Materials science > Congresses.

Materials > Technological innovations > Congresses.

Materials > Mathematical models > Congresses.

Materials > Mathematical models

Materials > Technological innovations

Congress

proceedings (reports)

Conference papers and proceedings

Conference papers and proceedings.